SW-ENi1K
Hits：55
ENi1K
SUBMERGED ARC WELDING WIRE: SW-ENi1K
Specification：AWS A5.23 ENi1K
ASME/SFA 5.23 ENi1K
JIS Z 3351 YS-G
ISO 14171-B-SUN21
GB/T 5293 SUN21
Introduction：
For 550Mpa grade low alloy steel, contain 1% Ni, suitable for low temperature steel.
Well weldability: stable arc, easy slag removal,neat weld bead.
Application：
Cryogenic storage tank
Oil storage tank
Pressure Vessel
Synthetic chemical
Pass the certification：
CE、JIS
Chemical Composition of Wire %：
| C | Mn | Si | P | S | Ni | Cr | Mo | |
| AWS | ≤0.12 | 0.80-1.40 | 0.40-0.80 | ≤0.020 | ≤0.020 | 0.75-1.25 | ≤0.20 | ≤0.15 |
| TR(HC) | 0.07 | 1.14 | 0.49 | 0.008 | 0.006 | 0.94 | 0.02 | 0.01 |
Mechanical Properties of Deposited Metal：
| Tensile Strength | Yield Strength | Elongation | Impact Value | |||||
| Mpa | Mpa | % | -50℃ J | |||||
| TR(HC) | 492 | 582 | 24 | 114 | ||||
Diameter/Packing：
| Diameter | Hollow Coil | Drum | Spool | Basket | |||||||
| mm/in | 25kg(55lbs) | 50kg(110lbs) | 60Kg(132lbs) | 100Kg(220lbs) | 150Kg(330lbs) | 250Kg(550lbs) | 350Kg(770lbs) | 250Kg(550lbs) | 350Kg(770lbs) | 20Kg(44lbs) | 25kg(55lbs) |
| 1.0(0.040) | √ | √ | |||||||||
| 1.2(0.045) | √ | √ | |||||||||
| 1.4(0.052) | √ | √ | |||||||||
| 1.6(1/16) | √ | √ | √ | √ | √ | √ | |||||
| 2.0(5/64) | √ | √ | √ | ||||||||
| 2.4(3/32) | √ | √ | √ | √ | √ | √ | √ | √ | |||
| 3.0(0.118) | √ | √ | √ | √ | √ | √ | √ | √ | |||
| 3.2(1/8) | √ | √ | √ | √ | √ | √ | √ | √ | |||
| 4.0(5/32) | √ | √ | √ | √ | √ | √ | √ | √ | |||
| 4.8(3/16) | √ | √ | √ | √ | √ | √ | √ | √ | |||
| 5.0(0.197) | √ | √ | √ | √ | √ | √ | √ | √ | |||
| 6.0(15/64) | √ | √ | √ | √ | |||||||
| 6.4(1/14) | √ | √ | √ | √ | |||||||
Welding position：PA
Points for Attention：
1. The Welding flux must be baked under 300-350℃ for 1-2 hours.
2. Remove the oil, dust and rust from the welding parts
苏公网安备 32058202010273号